Print
The manufacturer's warranty, if any, constitutes the only warranty with respect to the sale of all products by NCS and its affiliates; all products must only be used in accordance with the manufacturer's instructions. See product label for full instructions and additional information.
ATD Tools Standard 1/4” NPT Filter, Metal Bowl, 40 Micron, 48 SCFM
Order No. ATD-7828
- Pipe Size: 1/2”
- Bowl Type: metal
- Operating Temperature: 40º-160 F
- Maximum Flow Pressure: 250 psig
- 100 SCFM maximum
- 6 oz. bowl capacity
- manual drain
- 40 micron filter element
- Removes liquid, water, dirt and debris from air lines.
- Protects components and air tools from premature failure.
- General purpose filters remove harmful water condensate, pipe scale, dirt and rust from your compressed air system.
- This prevents corrosive damage to compressed air equipment and finished products.
- Typically, general purpose filters are installed upstream of regulators to prevent valve failure.
- They are also used as pre-filters to oil removing and coalescing filters to insure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceutical.
- For protection, use a main line filter on main air line and a general purpose filter at each work station.
- Weight (lbs): 1.70
- Case Quantity: EA
- UPC Number: 00663126078287
WARNING: This product can expose you to chemicals including LEAD AND LEAD COMPOUNDS, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
